ref:19 | tire saver; chrome steel | |
ref:32 | tourist brake cable guide; stem mount | |
ref:34 | "le guidgaine" racing brake cable guide | |
ref:260 | front rack; to fit sidepull brakes; chrome steel | |
ref:260pl | front rack w/attachment for headlight; to fit sidepull brakes; chrome steel | |
ref:270 | front rack; to fit mafac centerpulls racer etc; chrome steel | |
ref:270pl | front rack w/attachment for headlight; to fit mafac centerpulls racer etc; chrome steel | |
ref:271 | small training bag | |
ref:272 | tourist handlebar bag; cotton duck; leather straps; map pocket | |
ref:365 | allen key seat post binder bolt; chrome steel | |
ref:368 | seat post binder bolt w/cable hanger; chrome steel | |
ref:740/3.96 | bearing set for headsets; 48 | |
ref:? | front rack; to fit mafac cantilevers; chrome steel | |
ref:? | small handlebar bag w/ integrated rack, mounts w/ replacement stem bolt | |
ref:? | handlebar bag rack, mounts w/ replacement stem bolt | |
ref:? | panniers to match handlebar bag |
- | massive reinforced 5-pin chainwheel for road hour record 1949 | |
- | shifter upgrade for cyclo eccentrics, circa 1950s. | |
- | alternate 3-pin pattern chainwheel, circa 1950s | |
- | "adapteur" to mount "criterium" chainwheels to Rene Herse 3-arm cranks, circa 1951 | |
- | "adapteur"to mount "criterium" chainwheels to 3-arm cranks, in much the same style as the "adapteur" for Herse cranks listed above, circa 1951. | |
- | double chainwheel set to mount to Bartali cranks, made for Bartali's 1952 tdF | |
- | modified ref:32 brake cable guide for 1952 brussels show | |
- | "adapteur" to mount "criterium" chainwheels to Nervar 3-arm cranks, made for Koblet's 1953 tdF | |
- | custom "pro 5 vis" chainwheel drilled for 80mm bcd and "criterium" chainwheels, custom for an influential french rider (dejeans?) circa 1950 | |
- | custom curved crankarms, supposedly built for a 1960s French show bike | |
- | alloy cogs to fit j. moyne freewheels |
- | "adapteur", 50mm bcd to "criterium" chainwheels; chromed steel; designed for use on track tandems w/ 1" x 3/16" chainwheels (1/4" spacer between chainwheel mounts). this example has been drilled out. likely of British make, but possibly Australian, as it was found in there on a Claud Butler tandem track frame. | |
- | tire saver; just different enough from ref:19 for me to be unsure. | |
- | triplizer to fit ta inner chainwheels campagnolo crankarms; probably made by Jim Merz in the US | |
- | Holdsworth "Claud Butler" rear carrier, often mistakenly attributed to T.A. |